Want latex spraying Katwijk done? Latex-Spuiter.nl comes from Haarlem as your latex sprayer for advice and a fixed quote. We spray walls and ceilings in two coats from €7.95 per m2 (Basic), €9.95 (Medium) or €11.95 (High).
The village of Katwijk aan Zee lies about 25.5 km as the crow flies from the centre of Haarlem. That is at the edge of our service area and only just within 30 km. The exact price is in the quote, and we agree the planning together.
Katwijk in figures: a municipality of family homes and apartments
With 66,966 residents according to CBS figures (2024), Katwijk is a sizeable municipality. There are 27,313 households and 27,594 homes. Density is 2,700 residents per km2 and the urbanisation class is 2 (highly urban).
The housing mix is varied: 59% family houses and 41% apartments or other multi-family homes. With more than four in ten homes being apartments, spraying work here is often compact and easy to plan. At the same time, more than half are ground-level homes with stairs, a landing and storage space.
The split between owner-occupied and rented is 65% and 35%, and the average WOZ value (the municipal property valuation) is 439 thousand euros. Of the homes, 90% are older than 10 years and 10% are new. That makes the stock mostly existing housing.
What does that mean for your walls? In existing homes small repairs are often needed before we spray. We sand by hand, seal all inside corners and repair small damage. For the basics, Basic is enough; if you want more wear resistance, choose Medium or High. You can compare the packages on our page about affordable latex spraying or on the page about the price of latex spraying.
The scrub class (under NEN-EN 13300) determines how well a wall withstands cleaning. Basic is class 3, Medium class 2 and High class 1. In a hallway where backpacks, coats and shoes rub against the wall every day, you choose what suits the use. We advise you on site, without any obligation to book.
Homes in Katwijk in figures
| Feature | Katwijk |
|---|---|
| Residents | 66,966 |
| Households | 27,313 |
| Homes | 27,594 |
| Average WOZ value (property valuation) | €439,000 |
| Single-family houses | 59% |
| Apartments | 41% |
| Owner-occupied | 65% |
| Rented | 35% |
| Built in the last 10 years | 10% |
Apartment or terraced house in Katwijk: how we approach the spray job
With an apartment the emphasis is on access, masking many frames and protecting shared areas. We check beforehand whether the VvE (the owners' association of the building) needs to know anything and whether there is a lift. Only the rooms inside your own home are sprayed, unless you agree otherwise. We leave the floors of the stairwell or the corridor outside your front door alone.
With a ground-level home it often involves several floors. We start on the top floor, work down and finish with the hall and stairwell. That way nothing is soiled by paint mist. We also mask the inside of cupboards and alcoves if you do not want them sprayed. Ceilings above a staircase or by a dormer need extra preparation, because the surface there has more angles.
If you live in the house during the spraying, we work floor by floor. You do not have to move out, but the sprayed room cannot be used for a while. Exactly how long depends on the drying time. According to the data sheet for Sigma Air Pure Supermatt, that latex is dry after about 1 hour and can be overpainted after 4 hours at 23 degrees and 50% humidity.
Want to know whether spraying or rolling suits your home better? Read our comparison of rolling or spraying latex and feel free to ask us. In short: spraying is fast and even, but needs more preparation than a roller. That is already in the price, because masking, sanding and filling are included.
Latex spraying prices in Katwijk
| Package | From per m2 | Latex |
|---|---|---|
| Basic | €7.95 | standard latex, scrub class 3 |
| Medium | €9.95 | medium latex, scrub class 2 |
| High | €11.95 | high-end latex, scrub class 1 |
Every package includes: advice on site, checking the surface, masking windows and frames, small repairs, hand sanding of walls and ceilings, sealing all inside corners, spraying latex in 2 coats, cleaning up, handover.
Example for Katwijk: living room of 6 x 5 metres
Based on 30 m2 ceiling and 57.2 m2 walls (ceiling height 2.6 m), 87.2 m2 in total, without deducting windows and doors. This is an estimate based on the from-prices; the quote after the visit is binding.
| Package | Calculation | Estimate |
|---|---|---|
| Basic | 87.2 m2 x €7.95 | €693.24 |
| Medium | 87.2 m2 x €9.95 | €867.64 |
| High | 87.2 m2 x €11.95 | €1,042.04 |
Service area: Katwijk from Haarlem
The village of Katwijk aan Zee lies about 25.5 km as the crow flies from the centre of Haarlem. That is at the edge of the service area but within 30 km. So it is possible, and for a room or two we like to look at smart planning.
In the area we also work in spray painting in Noordwijk and latex spraying Oegstgeest. If there are several jobs in the region, we plan them back to back as much as possible.
You provide a clear space: small items away, large furniture in the middle. We bring everything needed, from masking material to the airless sprayer. Afterwards we clear up and do the handover together. Already have a colour in mind? Bring a sample to the advice visit and we will see whether it suits your walls. In the planning we take the amount of work into account: a complete house takes several days, a single room is quicker. At the advice visit we give a clear estimate so you know where you stand. Want a price first? Then request a quote.
Where Katwijk is in our service area
How we work in Katwijk
- Free visit on site: we look at walls, ceilings and the surface and measure the m2.
- A clear quote with the package, the m2 and the planning.
- Masking and covering: floors, windows, frames, sockets and furniture.
- Preparation: hand sanding, small repairs and sealing inside corners.
- Spraying two coats of latex with an airless sprayer.
- Cleaning up and walking through the result together. You pay after completion.
Lacquer spraying in Katwijk: doors, frames and stairs
Interior doors, frames and stairs in existing homes are often due a fresh coat. We spray an interior door from €110, a closed staircase from €650 and an open staircase from €700. It is tailor-made work, so the exact price follows after a viewing.
Spraying gives a closed lacquer coat without brush marks. Want to know more about the method and the costs? Read the page lacquer spraying and our page about lacquer spraying cost.
The woodwork is first cleaned, lightly sanded and primed. Then comes the topcoat. According to the data sheet for Flexa Strak in de Lak, that water-based topcoat is dust dry after 1 hour at 20 degrees, can be overpainted after 4 hours and is fully cured after 4 days. So with a sprayed staircase it is best to wear soft shoes or socks for the first few days.
Frequently asked questions about latex spraying in Katwijk
Do you also spray apartments in Katwijk?
Yes. In Katwijk, according to CBS, 41% of the homes are multi-family homes. With an apartment we discuss access, the lift, parking and possibly the VvE beforehand. We only spray inside your own home, unless you agree otherwise.
What does latex spraying in Katwijk cost?
From €7.95 per m2 (Basic), €9.95 (Medium) or €11.95 (High), based on light colours and 1 colour per quote. The exact price for your home in Katwijk is in the quote.
How far is Katwijk from your base in Haarlem?
The village of Katwijk aan Zee lies about 25.5 km as the crow flies from the centre of Haarlem. That is at the edge of the service area and within the 30 km we work in. We plan the appointment in consultation with you.
Can I stay living in my home in Katwijk while you spray?
Yes. We work room by room or floor by floor and mask floors and frames. The sprayed room cannot be used for a short while. Clear small items beforehand and we can start straight away.
What does latex spraying cost in Katwijk?
Spraying walls and ceilings starts from €7.95 (Basic, scrub class 3), €9.95 (Medium, scrub class 2) or €11.95 (High, scrub class 1) per m2, based on light colours and one colour. The exact price for Katwijk is in the quote after a free visit.
How long does it take to spray a room in Katwijk?
In our experience one coat on a room of 12 to 20 m2 takes 30 to 60 minutes of spraying. Masking takes most of the time. A family home of about 120 m2 is often finished in 1 to 2 days, including preparation.
Is spraying faster than rolling?
In our experience latex spraying is up to 5 times faster than traditional rolling, because the airless machine atomises the paint under high pressure. The gain is biggest in an empty home or new build, where there is little to mask.
Do I need to empty my home in Katwijk?
Not completely. Remove loose items and small furniture; what stays is moved to the middle of the room and covered. We mask floors, windows and frames before spraying.
Which scrub class should I choose?
For a bedroom class 3 (Basic) is often enough. In a hallway, staircase, kitchen or children's room choose class 2 or 1, because you clean those walls more often. Class 1 is the most washable under NEN-EN 13300.
Is VAT included?
The VAT amount is shown in the quote. For homes older than 2 years the reduced 9% VAT rate on painting applies, according to the Dutch Tax Administration.
More about spray painting walls and ceilings
- latex spraying Noordwijk
- spray painting in Oegstgeest
- latex spraying cost per m2
- ceiling spraying
- wall spraying
- choosing a latex sprayer
- service area around Haarlem
- free quote
Written by Sander, latex sprayer at Meesterspuiters in Haarlem, with more than 10 years of experience in latex and lacquer spraying. Updated on 6 October 2026. More background in our knowledge base.
Sources
- Statistics Netherlands (CBS), Key figures districts and neighbourhoods 2024 (85984NED), accessed 6 October 2026
- Prices latex and lacquer spraying, Meesterspuiters, accessed 6 October 2026
